Home Metrology
Customer Services
About us
Downloads   Metrology
Laser Tracker Systems
 Leica Absolute Tracker AT402
  Why Leica AT402?
 Leica Absolute Tracker AT930
 Leica Absolute Tracker AT960
 Leica Probing Solutions
 Leica Scanning Solutions
 Leica T-Mac
 Leica Automated Solutions
Total Stations (TPS)

Why Leica AT402?

Leica Absolute Tracker AT402 technology highlights



IP54 sealed

Independently certified IEC 60529 usage in even the most demanding conditions.

Extremely light and compact: 8.1 kg incl. controller, just over 290 mm tall

Measuring where no other laser tracker can go. The controller stays out of the user’s way, e.g. attached to the tripod.

Cable-less design

By combining built in WiFi connectivity and on board battery power, the sensor can operate without any wires connected at all.

Hot swappable battery operation

No need to worry about AC (mains) power - the sensor can run continuously with a new set of batteries able to be swapped in without interruption

Automatic target recognition (ATR)

The ATR allows constant tracking and fine positioning with different reflector types to a typical radial volume of 320 m.

PowerLock beam recovery technology

No need to worry about “breaking the beam”: the tracker automatically locks onto the user providing up to 20% time savings over traditional laser tracker technologies

Proven Absolute Distance Meter technology

The most accurate Leica Geosystems distance meter ever: The ADM has a resolution of 0.1 micron and a maximum uncertainty of 10 microns over a full 160 m radial volume.

Quick Release tribrach and precision level to gravity sensor

A built in “survey grade” level to gravity sensor is combined with a simple three screw leveling quick release platform for quick and easy machine setup and relocation.

Overview Camera

Integrated Overview Camera to allow on-line steering of the laser tracker for remote or fixed installations

Integrated environmental monitor

Automatic reading and updating of the environmental parameters avoids inaccurate calculations or wrongly input values.

Leica Geosystems proprietary quadruple reading absolute angle detection system

The absolute angle encoders provide traceable ISO 17123-3 0.5” accuracy with a 0.07” resolution guaranteeing system accuracy over extremely long ranges.

Power Over Ethernet

Due to its low power requirements the sensor can use POE+ technology that combines power and data into a single off the shelf Cat5 LAN cable.


Need more information?

Do you need more information on this product?

Please choose what you are looking for, select your country, then click on [Proceed] to get your nearest Leica Geosystems contact: